Replacement Treble Hooks
The cheapest upgrade you can make to a lure.
ChronicAnglers is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.
Lure companies compete on the body and the finish, because that is what sells off a peg. The hooks are where the cost comes out. Swapping factory trebles for good ones is the least glamorous upgrade in fishing and one of the few with an obvious, measurable result.
Why the Replacement Treble Hooks stands out
Sharpness is the difference on a short strike
A fish that swipes at a lure gives the hook a fraction of a second and very little pressure. A sticky-sharp point converts that; a dull one does not. Most of the fish you feel and do not hook are this.
Watch the weight when you swap
Heavier hooks change how a lure sits and swims, and a floating lure can be made to sink. Check the action in the water after a swap, especially on suspending jerkbaits where balance is the entire design.
You will need split ring pliers
Opening split rings with fingernails deforms the ring and cuts thumbs. A dedicated split ring plier costs very little and turns this from an annoying job into a two-minute one.
At a glance
| Type | Treble hooks |
|---|---|
| Use | Upgrading factory lure hooks |
| Note | Check lure action after swapping |
| Tool | Split ring pliers |
The verdict
Upgrade the hooks on any lure you actually rely on. Keep the factory trebles in a tin as spares, and check the action in the water after the swap.
ChronicAnglers is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you.